【WAKOUWA】DECK SHOES LOW WHT SOLE

¥20,900

MATERIAL
ORIGIN
MADE IN TAIWAN
COLOR

COL1
  • 【WAKOUWA】DECK SHOES LOW WHT SOLE
  • 【WAKOUWA】DECK SHOES LOW WHT SOLE

※紙の計測シートは以下のURLから印刷可能です。必ず「実際のサイズ」で印刷下さいませ。
http://anatomica.jp/img/wakuwa-print-4-11HMODIFY.pdf

ANATOMICAがオリジナルから木型(ラスト)を開発し、12回ものサンプル製作を経て誕生した定番スニーカー。

フィッティングを何より重要視するため、これまで通販をしておりませんでしたが、ご自宅にて一人で足の計測ができる「紙の計測シート」が完成したため、公式オンラインショップ初登場です。

インソールにも記されている「SCIENTIFIC SHOE FITTING」という言葉からも分かるように、オーソペディックシューズ(医療用矯正靴)特有の「アシンメトリックなインサイドストレート・アウトカーブ」な形状をしています。

土踏まずで足のホールドをし、トウの部分には捨て寸がございます。こうすることでストレスフリーな履き心地が生まれます。捨て寸がある靴ですので、足先にぶつかるものがない状態が理想です。普段は履かれている靴よりも足先にゆとりを感じられ、かつ土踏まずのホールドを感じられるサイズが理想です。

今はあまり採用されていない「ヴァルカナイズド製法」を採用。スニーカーのキャンバス地のアッパーとゴムのソールを縫い合わせるのではなく、圧着させることでより素足に近い柔らかな履き心地を実現しています。

※「計測シート」を用いた計測方法について
計測シートは商品画像の最後に載せていますのでダウンロード下さいませ。
計測方法についてはこちらの動画にて詳しく説明がございますので是非ご覧くださいませ。
また、サイズに不安がある方は各店への電話での問い合わせも受け付けております。
既にお持ちの方、直営店舗にて計測済みの方はそちらのサイズで問題ございません。

 用意するもの:紙の計測シート、テープ、ペン、箱状のもの
1、紙の計測シートを印刷して下さい(A4サイズの紙に「実際のサイズ」で印刷ください。印刷サイズがずれるとそのまま計測値がずれてしまいます。)
2、紙の計測シートの「guide line」に沿って谷折りにします。
3、壁に沿って箱状のもの(本や雑誌を重ねて代用可能です)を置き、そこへ計測シートの谷折り側を合わせて床にテープで固定します。
4、「guide line」にかかとを合わせ、左足であれば左足の内側を縦の「guide line」に沿わせます。この際に足を揃えて自然体で真下を見て下さい。足の一番長いところが指し示している箇所にペンで印を付けてください。(足の指を傷つけないようにご注意ください。)そこがお客様の足長となります。前かがみになりすぎたり、逆に後ろに体重がのっていると間違ったサイズを選んでしまう恐れがあります。
5、同様にもう片方の足も計測します。足の左右差がある方がほとんどの為です。両足を測り、長い方のサイズを選んでください。足の幅や甲の高さに不安がある方は必ずお問い合わせください。真上より写真を撮って問い合わせていただくことをおすすめします。足幅、甲によっては足長で示したサイズよりハーフサイズの前後ずらすことをおすすめする場合もございます。

FABRIC:UPPER:100%COTTON, SOLE:100%RUBBER
COLOR:NAVY / OFF WHITE
SIZE:5H / 6 / 6H / 7 / 7H / 8 / 8H / 9 / 9H / 10 / 10H / 11
ORIGIN:TAIWAN

* Paper measurement sheets can be printed from the following URL. Please be sure to print in "actual size".
http://anatomica.jp/img/wakuwa-print-4-11HMODIFY.pdf

A classic sneaker that ANATOMICA developed a wooden pattern (last) from the original and was born after making samples 12 times.

We haven't mail-ordered it until now because we place the highest priority on fitting, but now that we have completed a "paper measurement sheet" that allows you to measure your feet by yourself at home, this is the first appearance in the official online shop.

As you can see from the word "SCIENTIFIC SHOE FITTING" written on the insole, it has an "asymmetric inside straight out curve" shape peculiar to orthopedic shoes (medical orthopedic shoes).

Hold your foot on the arch, and there is a throw-away size on the toe. This will create a stress-free comfort. Since the shoes have a throw-away size, it is ideal that there is nothing to hit your toes. The ideal size is one that gives you more space at your toes than the shoes you normally wear, and also gives you a hold on the arch.

Adopted "Vulcanized manufacturing method" which is not widely adopted now. Instead of sewing the canvas upper of the sneakers and the rubber sole, they are crimped to achieve a softer feel that is closer to bare feet.

* About the measurement method using the "measurement sheet"
Please download the measurement sheet as it is placed at the end of the product image.
Please see the here video for details on the measurement method.
If you are worried about the size, we also accept inquiries by phone to each store.
If you already have it, or if you have already measured it at a directly managed store, there is no problem with that size.

Items to prepare: Paper measurement sheet, tape, pen, box-shaped item
1. Print a paper measurement sheet (print on A4 size paper in "actual size". If the print size deviates, the measured value will deviate as it is.)
2. Fold it in a valley along the "guide line" on the paper measurement sheet.
3. Place a box-shaped object (books and magazines can be stacked and used as a substitute) along the wall, align the valley fold side of the measurement sheet with it, and tape it to the floor.
4. Align the heel with the "guide line", and if it is the left foot, align the inside of the left foot with the vertical "guide line". At this time, align your legs and look directly underneath. Mark with a pen where the longest part of your foot points. (Be careful not to hurt your toes.) That is your foot length. If you lean forward too much, or if you have weight on the back, you may choose the wrong size.
5. Similarly, measure the other leg. This is because most people have a difference between the left and right feet. Measure both feet and choose the longer size. If you are worried about the width of your feet or the height of your instep, please be sure to contact us. We recommend that you take a picture from directly above and contact us. Depending on the foot width and instep, it may be recommended to shift the size by half from the size indicated by the foot length.

- About overseas delivery -
Areas we deliver to ANATOMICA Official ONLINE SHOP ships to anywhere on the globe.
Courier: EMS*We use DHL for deliveries to the US, Canada and Australia due to the effect of COVID-19.
Take a look